Description
Performance
| Frequency response | 20Hz – 20 kHz, +0/-1dB |
| Total harmonic distortion (THD) | <0.5%, 20Hz – 20kHz |
| Intermodulation distortion | = / <0.35% |
| Conversion Rate | >10V/us |
| Voltage gain | 36dB |
| Signal to noise ratio (less than rated power 20 Hz – 20 kHz, A-weighted sound level) | > 100dB |
| Damping factor | >200 (8Ω, 10Hz – 400Hz) |
| Crosstalk | -75dB @ 1kHz, -59dB @ 20kHz, based on rated output power |
| Input sensitivity | 0.775V or 1.4V (rated power 8Ω) |
| input resistance | 20kΩ |
| Input connector | One balanced XLR connector per channel |
| Output connector | One 4-pin Speakon per channel ®Connector and pair of binding posts |
| Front panel assembly | Power switch, channel gain control knob |
| Rear panel assembly | Output mode switch: stereo, parallel, bridge; sensitivity switch: 0.775V, 1.4V |
| Power Indicator | Blue and green two-color LED |
| Signal Indicator | One green LED per channel |
| Clip indicator | One yellow LED per channel |
| Fault Indicator | One red LED per channel, indicating that the channel is closed |
| Power cables | Power plug: 10A, 250V; power cord: CCC 3 × 1.5mm 2 |
| protection | Prevent short circuit, no load, switch noise, radio interference protection circuit |
| Ventilation | Air convection mechanism |
| Heat dissipation | Internal air is forced to dissipate heat, fan cooling, rapid adjustment, temperature protection |
| Size (W × H × D) | 19” x 3.5” x 15.6” (482 mm x 89 mm x 395 mm) |
| Net Weight | 21.5 lb (9.7 kg) |
| Shipping weight | 25.7 lb (11.7 kg) |
