商品說明
Product Description
Designed for Commercial A/V Installations in 220V-240V regions, the CN-3600 SE combines robust control capabilities via SmartSequencing™ Technology, advanced AC protection, and AC noise filtration.
The new CN-3600 SE is one of the first products to feature Furman’s SmartSequencing™ technology, which allows large and complex A/V systems to be safely powered on and off with a simple press of a button or turn of a key, even by nontechnical personnel. SmartSequencing’s bidirectional communications between installed units enables a primary unit to control and sequence multiple secondary units, ensuring multizone electronic systems are powered on and off safely and dependably from a single control point across an entire installation. Units can be connected via current loop at runs of more than 1,000 feet with backwards compatibility with Furman’s legacy sequencers.
In addition, the CN-3600 SE offers robust control options, equipped with RS-232 ports and command sets for integration with control systems.
Special Features
- Surge Protection: Series Multi-Stage Protection (SMP) Technology provides the highest level of surge & spike protection available
- Noise Filtration: Linear Filtration Technology (LiFT) reduces AC noise linearly across a very wide bandwidth for unequaled audio & video clarity
- Voltage Protection: Extreme Voltage Shutdown (EVS) circuity safely powers down itself and connected equipment during unsafe voltage periods
- SmartSequencing™: SmartSequencing allows bidirectional, safe sequenced power up/down operations via the push of a button or turn of a key
- Diagnostic Lights: Diagnostic lights provide valuable system information including power quality, “Protectection Ok” indicator, and Extreme Voltage indicator
- 16 Amp Output Current: 16 amp maximum current capacity with incorporated 16 amp thermal circuit breaker
- Remote Access (RS-232): RS-232 compatibility & command set provide integration with control systems, open source and control programming
- Nine Total Outlets: The CN-3600 SE contains eight rear panel IEC C13 outlets and one front panel IEC C13 outlet
產品描述
CN-3600 SE 專為 220V-240V 地區的商用影音系統安裝而設計，整合了透過 SmartSequencing™ 智能時序技術實現的強大控制能力、先進的交流電保護及雜訊濾波功能。
新型 CN-3600 SE 是首批搭載 Furman SmartSequencing™ 技術的產品之一，該技術使得大型複雜影音系統僅需按下一鍵或轉動鑰匙即可安全開關機，即使非技術人員也能輕鬆操作。SmartSequencing™ 支援設備間雙向通信，允許一台主控單元對多台受控單元進行排序管理，確保多區域電子系統能透過安裝環境中的單一控制點，實現安全可靠的全局開關機。各單元可透過電流迴路連接，佈線距離超過 1,000 英呎，並相容於 Furman 傳統時序控制器。
此外，CN-3600 SE 提供靈活的控制選項，配備 RS-232 介面及控制指令集，便於與各類控制系統整合。
產品特徵
突波保護：串聯多級保護 (SMP) 技術提供最高等級的突波與尖峰電壓保護。
雜訊濾波：線性濾波技術 (LiFT) 於極寬頻寬內線性降低交流電雜訊，帶來無與倫比的音訊與視訊清晰度。
電壓保護：極端電壓關斷 (EVS) 電路可在不安全的電壓期間，安全關閉自身及所連接的設備電源。
智能時序技術™：智能時序技術允許透過按鈕或鑰匙開關，進行雙向、安全的順序開機/關機操作。
診斷指示燈：診斷指示燈提供寶貴的系統資訊，包括電源品質、「保護正常」指示燈及極端電壓指示燈。
16 安培輸出電流：具備 16 安培最大電流容量，並內建 16 安培熱熔斷斷路器。
遠端存取 (RS-232)：RS-232 相容性及指令集，可與控制系統、開源及控制程式進行整合。
總計九個輸出插座：CN-3600 SE 包含八個後面板 IEC C13 輸出插座及一個前面板 IEC C13 輸出插座。
Technical Specifications
| Item | Specification |
|---|---|
| Family | Contractor Series 240V |
| Line Voltage | 240 Volts |
| AC Voltage Input Range | 180-270VAC, 50/60Hz |
| AC Cord | 1.5mm² x 3, 2.5m Long, black, IEC C19 Female to Schuko CEE 7/7 Male Plug |
| Rear Panel Outlets | 1 IEC C13 pair (Unswitched), 3 IEC C13 pairs (Sequenced, each pair controlled by separate relay) |
| Front Panel | 1 IEC C13 (Unswitched) |
| Surge/Under-Overvoltage Protection | AC Surge Protection Series Multi-Stage Protection SMP |
| Spike Protection Mode | Line to neutral, zero ground leakage |
| Spike Clamping Voltage | 375V peak @ 6,000 volts/3,000 amps |
| Response Time | 1 nanosecond |
| Maximum Surge Current | 6,500 Amps |
| AC Undervoltage Protection | EVS, 175VAC±3VAC |
| AC Overvoltage Protection | EVS, 275VAC±5VAC |
| AC Overvoltage Reset Modes | Manual and Auto-reset (configurable) |
| AC Filtering | LiFT |
| Noise Attenuation | Linear, 10dB @10KHz, 40dB @100KHz, 50dB @500KHz |
| Operating Temperature Range | 5°C (40°F) to 40°C (105°F) |
| Humidity Range | <90% rH (Relative Humidity) |
| Keyswitch | Front panel, 3-position keyswitch (On, Off, Remote) |
| Keys | Included, 1 pair |
| Pushbutton Switch | Front panel, hidden by security cover |
| Circuit Breaker | Front panel, pushbutton, 20A Thermal Breaker |
| Front Panel Diagnostic Indicators | Primary link, Secondary link, Ethernet, Remote off, Delay 1, Delay 2, Delay 3, Power, Protection OK, Extreme Voltage |
| Front Panel DIP Switches | Hidden by security cover, 1 Minute Delay, 2 Minute Delay, 4 Minute Delay, Force Off NO/NC, 12V Mode On/Off, BND Mode On, Momentary/Maintained, Primary/Secondary, EVS Reset Auto/Manual |
| Potentiometer | Front panel, hidden by security cover, fine-tune delay adjust |
| Control/Status/Triggering (Rear Panel) | Remote Terminal +5-30VDC In, 12VDC (12mA) Out |
| SmartSequencing | Phoenix 4-Pin Connector, Screw Terminals, Primary & Secondary Links (Current Loop – 1000’ nominal) |
| Remote Terminal | Phoenix 4-Pin Connector With Screw Terminals; +12V, STAT, REM, GND (Class 2 Wiring) |
| Force Off/Delay 3 Terminal | Phoenix 5-Pin Connector With Screw Terminals, FORCE OFF, DELAY 3 (Class 2 Wiring) |
| RS-232 Compatible | Yes, DB-9 Connector |
| Voltmeter | Available with RS-232, ± 2VAC accuracy |
| Ammeter | Available with RS-232, ±1A accuracy |
| Power Consumption (No Load) | 10 Watts |
| Safety Agency | NRTL-C, RoHS Compliant |
| UPC | 654061028499 |
| Proposition 65 Warning | WARNING: Cancer and Reproductive Harm – https://www.P65Warnings.ca.gov |
